Rebuilding Job to send to additional MTAs

Forum to discuss Features/Usage/Bugs of Multiple MTA Addon

Rebuilding Job to send to additional MTAs

Postby sendmedia » Thu Oct 10, 2013 12:18 pm

Hey,

Its Mike from Send Media here, we spoke on Skype on how to increase the Multithread on an existing job. You told me to run the following in SSH which is what i did:

php cli.php --job-rebuild-threads --threads=15 --emails=200 --jobid=315

I did that and it showed all this code, and then resumed the job. How ever it still shows the multi-thread as 10 when i want it set as 15. Another thing is iv added new MTAs to the group and its showing the 11 MTAs in total when i ran the above code but again when i look at the scedualed emails info it still shows its sending to 7 MTAs instead of the 11.

Code: Select all
INFO[Multithread slots]: Array
(
    [0] => [12:30000|0|0|1381418323s ago][INACTIVE]
    [1] => [13:30000|0|0|1381418323s ago][INACTIVE]
    [2] => [14:30000|0|0|1381418323s ago][INACTIVE]
    [3] => [15:30000|0|0|1381418323s ago][INACTIVE]
    [4] => [16:30000|0|0|1381418323s ago][INACTIVE]
    [5] => [17:30000|0|0|1381418323s ago][INACTIVE]
    [6] => [18:30000|0|0|1381418323s ago][INACTIVE]
    [7] => [19:30000|0|0|1381418323s ago][INACTIVE]
    [8] => [20:29556|0|0|1381418323s ago][INACTIVE]
    [9] => [21:27500|0|0|1381418323s ago][INACTIVE]
    [10] => [22:27500|0|0|1381418323s ago][INACTIVE]
)


Please can you help me, also how in SSH can i see live how many emails are being sent to each MTA like u show in your video?

Thanks
sendmedia
 
Posts: 30
Joined: Thu Oct 10, 2013 12:08 pm

Re: Rebuilding Job to send to additional MTAs

Postby sendmedia » Thu Oct 10, 2013 1:09 pm

When i run the following:

Code: Select all
php cli.php --queue-info --jobid=301


It says that all the MTAs are active, but i can see from my MTAs stats that 0 emails are being sent from the new ones i added, only the MTAs that was there when i made the email campaign. I know this as i can see how many emails are being sent on each account, the the new ones are left as 0 whilst the others are keep going up.

Code: Select all
INFO[Multithread slots]: Array
(
    [0] => [23:20000|0|0|78s ago][ACTIVE]
    [1] => [24:20000|0|0|78s ago][ACTIVE]
    [2] => [25:20000|0|0|78s ago][ACTIVE]
    [3] => [26:20000|0|0|79s ago][ACTIVE]
    [4] => [27:20000|0|0|77s ago][ACTIVE]
    [5] => [28:17671|0|0|78s ago][ACTIVE]
    [6] => [29:17500|0|0|78s ago][ACTIVE]
    [7] => [30:17500|0|0|75s ago][ACTIVE]
    [8] => [31:17500|0|0|77s ago][ACTIVE]
    [9] => [32:17500|0|0|76s ago][ACTIVE]
    [10] => [33:17500|0|0|76s ago][ACTIVE]
    [11] => [34:17500|0|0|77s ago][ACTIVE]
    [12] => [35:17500|0|0|77s ago][ACTIVE]
    [13] => [36:17500|0|0|77s ago][ACTIVE]
    [14] => [37:17500|0|0|76s ago][ACTIVE]
    [15] => [38:17500|0|0|77s ago][ACTIVE]
)


I can also see the following:

Code: Select all
[multithread] => 10


AND

Code: Select all
[mta] => Array
        (
            [groups] => Array
                (
                    [1] => Array
                        (
                            [0] => 1
                            [1] => 2
                            [2] => 3
                            [3] => 5
                            [4] => 6
                            [5] => 7
                            [6] => 8
                        )

                )

            [groups_mail_settings] => Array
                (
                    [1] => Array
                        (
                            [from] => 1
                            [reply] => 1
                            [bounce] =>
                        )

                )

            [group_names] => Array
                (
                    [1] => Main
                )

            [resend] => Array
                (
                    [times] => 0
                    [current_time] => 0
                )

            [reschedule] => Array
                (
                    [times] => 0
                    [current_time] => 0
                )

            [pmtajobid] => Array
                (
                    [enabled] => 1
                )

        )


Which shows its only use the 7 MTAs for some reason and not the 11 thats now there.

Please help i need this fixed asap.
sendmedia
 
Posts: 30
Joined: Thu Oct 10, 2013 12:08 pm

Re: Rebuilding Job to send to additional MTAs

Postby sendmedia » Thu Oct 10, 2013 1:13 pm

Just noticed something else, all the above was from this section:

INFO[Job details]: Array

Now if i look a little bit above that i can see this bit:

[multithread] => 16

I'm not sure which part that is in as i cant scroll up any more. So something is not right.
sendmedia
 
Posts: 30
Joined: Thu Oct 10, 2013 12:08 pm

Re: Rebuilding Job to send to additional MTAs

Postby MaBoRaK » Thu Oct 10, 2013 6:17 pm

loading.........

Hello Mike, nice to see you here.

If you want to check the Threads status please run:

Code: Select all
php cli.php --status


You will receive something like:

Code: Select all
INFO[CLI]: [SYSTEM STATUS]
INFO[Status]: Array
(
    [3084] => Array
        (
            [threads] => Array
                (
                    [0] => 4402[ACTIVE][1s][500/40000]2%
                    [1] => 4403[ACTIVE][1s][500/40000]2%
                    [2] => 4404[ACTIVE][3s][500/40000]2%
                    [3] => 4405[ACTIVE][1s][500/36667]2%
                    [4] => 4406[ACTIVE][1s][500/30000]2%
                    [5] => 4407[ACTIVE][1s][500/30000]2%
                    [6] => 4408[ACTIVE][2s][500/30000]2%
                    [7] => 4409[ACTIVE][4s][500/30000]2%
                    [8] => 4410[ACTIVE][2s][500/30000]2%
                    [9] => 4411[ACTIVE][4s][500/30000]2%
                    [10] => 4412[ACTIVE][3s][500/30000]2%
                    [11] => 4413[ACTIVE][1s][500/30000]2%
                    [12] => 4414[ACTIVE][2s][500/30000]2%
                    [13] => 4415[ACTIVE][1s][500/30000]2%
                    [14] => 4416[ACTIVE][1s][500/30000]2%
                    [15] => 4417[ACTIVE][1s][500/30000]2%
                    [16] => 4418[ACTIVE][1s][500/30000]2%
                    [17] => 4419[ACTIVE][1s][500/30000]2%
                    [18] => 4420[ACTIVE][4s][500/30000]2%
                    [19] => 4421[ACTIVE][4s][500/30000]2%
                    [20] => 4422[ACTIVE][4s][500/30000]2%
                )

        )

    [3085] => Array
        (
            [threads] => Array
                (
                    [0] => 4423[ACTIVE][3s][500/50000]1%
                    [1] => 4424[ACTIVE][4s][500/50000]1%
                    [2] => 4425[ACTIVE][2s][500/46667]2%
                    [3] => 4426[ACTIVE][3s][500/40000]2%
                    [4] => 4427[ACTIVE][3s][500/40000]2%
                    [5] => 4428[ACTIVE][3s][500/40000]2%
                    [6] => 4429[ACTIVE][4s][500/40000]2%
                    [7] => 4430[ACTIVE][1s][500/40000]2%
                    [8] => 4431[ACTIVE][3s][500/40000]2%
                    [9] => 4432[ACTIVE][4s][500/40000]2%
                    [10] => 4433[ACTIVE][1s][500/40000]2%
                    [11] => 4434[ACTIVE][5s][500/40000]2%
                    [12] => 4435[ACTIVE][4s][500/40000]2%
                    [13] => 4436[ACTIVE][6s][500/40000]2%
                    [14] => 4437[ACTIVE][1s][500/40000]2%
                    [15] => 4438[ACTIVE][2s][500/40000]2%
                )

        )

)


About the Multiple MTA. The Addon is supposed to use only the MTA's selected in the Sending Step Page. But is a good idea implement your requirement ( Use entire group included the new mtas ) . I will do this in a new update.


connection closed.
CEO in Maborak Technologies and Interspire Addons Developer
MaBoRaK
Site Admin
 
Posts: 120
Joined: Thu Jul 18, 2013 10:41 am

Re: Rebuilding Job to send to additional MTAs

Postby sendmedia » Fri Oct 11, 2013 3:42 am

Hey,

So at the moment theres no way of doing what i need doing?

Thanks
sendmedia
 
Posts: 30
Joined: Thu Oct 10, 2013 12:08 pm


Return to Multiple MTA with IP Monitor

 


  • Related topics
    Replies
    Views
    Last post

Who is online

Users browsing this forum: No registered users and 1 guest

cron